Solar Water Heater Buying Guide
This article provides basic information on the components and types of solar water heaters currently available and the economic and environmental benefits of owning a system.
Solar water heaters are cost competitive in many applications when you account for the total energy costs over the life of the system. Although the initial cost of solar water heaters is higher than that of conventional water heaters, the fuel (sunshine) is free. Plus, they are environmentally friendly. To take advantage of these heaters, you must have an unshaded, south-facing location (a roof, for example) on your property.
These systems use the Sun to heat either water or a heat-transfer fluid, such as a water-glycol antifreeze mixture, in collectors generally mounted on a roof. The heated water is then stored in a tank similar to a conventional gas or electric water tank. Some systems use an electric pump to circulate the fluid through the collectors.
Solar water heaters can operate in any climate. Performance varies depending, in part, on how much solar energy is available at the site, but also on how cold the water coming into the system is. The colder the water, the more efficiently the system operates. In almost all climates, you will need a conventional backup system. In fact, many building codes require you to have a conventional water heater as the backup.
Before investing in any solar energy system, it is more cost effective to invest in making your home more energy efficient. Taking steps to use less hot water and to lower the temperature of the hot water you use reduces the size and cost of your solar water heater.
Good first steps are installing low-flow showerheads or flow restrictors in shower heads and faucets, insulating your current water heater, and insulating any hot water pipes that pass through unheated areas. If you have no dishwasher, or your dishwasher is equipped with its own automatic water heater, lower the thermostat on your water heater to 120°F (49°C).
You'll also want to make sure your site has enough available sunshine to meet your needs efficiently and economically. Your local solar equipment dealer can perform a solar site analysis for you or show you how to do your own.
Remember: Local zoning laws or covenants may restrict where you can place your collectors. Check with your city, county, and homeowners association to find out about any restrictions.
SOLAR WATER HEATER BASICS
Solar water heaters are made up of collectors, storage tanks, and, depending on the system, electric pumps.
There are basically three types of collectors: flatplate, evacuated-tube, and concentrating.
These are the most common type, is an insulated, weather-proofed box containing a dark absorber plate under one or more transparent or translucent covers.
These are made up of rows of parallel, transparent glass tubes. Each tube consists of a glass outer tube and an inner tube, or absorber, covered with a selective coating that absorbs solar energy well but inhibits radiative heat loss. The air is withdrawn ("evacuated") from the space between the tubes to form a vacuum, which eliminates conductive and convective heat loss.
For residential applications these are usually parabolic troughs that use mirrored surfaces to concentrate the sun's energy on an absorber tube (called a receiver) containing a heat-transfer fluid. For more information on solar collectors, contact EREC.
Most commercially available solar water heaters require a well-insulated storage tank. Many systems use converted electric water heater tanks or plumb the solar storage tank in series with the conventional water heater. In this arrangement, the solar water heater preheats water before it enters the conventional water heater.
Some solar water heaters use pumps to recirculate warm water from storage tanks through collectors and exposed piping. This is generally to protect the pipes from freezing when outside temperatures drop to freezing or below.
TYPES OF SOLAR WATER HEATERS
Solar water heaters can be either active or passive. An active system uses an electric pump to circulate the heat-transfer fluid; a passive system has no pump. The amount of hot water a solar water heater produces depends on the type and size of the system, the amount of sun available at the site, proper installation, and the tilt angle and orientation of the collectors.
Solar water heaters are also characterized as open loop (also called "direct") or closed loop (also called "indirect"). An open-loop system circulates household (potable) water through the collector. A closed-loop system uses a heat-transfer fluid (water or diluted antifreeze, for example) to collect heat and a heat exchanger to transfer the heat to household water.
Active systems use electric pumps, valves, and controllers to circulate water or other heat-transfer fluids through the collectors. They are usually more expensive than passive systems but are also more efficient. Active systems are usually easier to retrofit than passive systems because their storage tanks do not need to be installed above or close to the collectors. But because they use electricity, they will not function in a power outage.
Open-Loop Active Systems
Open-loop active systems use pumps to circulate household water through the collectors. This design is efficient and lowers operating costs but is not appropriate if your water is hard or acidic because scale and corrosion quickly disable the system.
The open loop systems should never be installed in climates that experience freezing temperatures for sustained periods. You can install them in mild but occasionally freezing climates, but you must consider freeze protection.
Recirculation systems are a specific type of open-loop system that provide freeze protection. They use the system pump to circulate warm water from storage tanks through collectors and exposed piping when temperatures approach freezing. Consider recirculation systems only where mild freezes occur once or twice a year at most. Activating the freeze protection more frequently wastes electricity and stored heat.
Of course, when the power is out, the pump will not work and the system will freeze. To guard against this, a freeze valve can be installed to provide additional protection in the event the pump doesn't operate. In freezing weather, the valve dribbles warmer water through the collector to prevent freezing. Consider recirculation systems only where mild freezes occur once or twice a year at most. Activating the freeze protection more frequently wastes electricity and stored heat.
Of course, when the power is out, the pump will not work and the system will freeze. To guard against this, a freeze valve can be installed to provide additional protection in the event the pump doesn't operate. In freezing weather, the valve dribbles warmer water through the collector to prevent freezing.
Closed-Loop Active Systems
These systems pump heat-transfer fluids (usually a glycol-water antifreeze mixture) through collectors. Heat exchangers transfer the heat from the fluid to the household water stored in the tanks.
Double-walled heat exchangers prevent contamination of household water. Some codes require double walls when the heat-transfer fluid is anything other than household water.
Closed-loop glycol systems are popular in areas subject to extended freezing temperatures because they offer good freeze protection. However, glycol antifreeze systems are a bit more expensive to buy and install, and the glycol must be checked each year and changed every 3 to 10 years, depending on glycol quality and system temperatures.
Drainback systems use water as the heat-transfer fluid in the collector loop. A pump circulates the water through the collectors. The water drains by gravity to the storage tank and heat exchanger; there are no valves to fail. When the pumps are off,the collectors are empty, which assures freeze protection and also allows the system to turn off if the water in the storage tank becomes too hot.
Pumps in Active Systems
The pumps in solar water heaters have low power requirements, and some companies now include direct current (DC) pumps powered by small solar-electric (photovoltaic, or PV) panels. PV panels convert sunlight into DC electricity. Such systems cost nothing to operate and continue to function during power outages.
Passive systems move household water or a heat-transfer fluid through the system without pumps. Passive systems have no electric components to break. This makes them generally more reliable, easier to maintain, and possibly longer lasting than active systems.
Passive systems can be less expensive than active systems, but they can also be less efficient.
Batch heaters (also known as "bread box" or integral collector storage systems) are simple passive systems consisting of one or more storage tanks placed in an insulated box that has a glazed side facing the sun. Batch heaters are inexpensive and have few components-in other words, less maintenance and fewer failures. A batch heater is mounted on the ground or on the roof (make sure your roof structure is strong enough to support it). Some batch heaters use "selective" surfaces on the tank(s). These surfaces absorb sun well but inhibit radiative loss.
In climates where freezing occurs, batch heaters must either be protected from freezing or drained for the winter. In well-designed systems, the most vulnerable components for freezing are the pipes, if located in uninsulated areas, that lead to the solar water heater. If these pipes are well insulated, the warmth from the tank will prevent freezing. Certified systems clearly state the temperature level that can cause damage. In addition, you can install heat tape (electrical plug-in tape to wrap around the pipes to keep them from freezing), insulate exposed pipes, or both. Remember, heat tape requires electricity, so the combination of freezing weather and a power outage can lead to burst pipes. If you live in an area where freezing is infrequent, you can use plastic pipe that does not crack or burst when it freezes. Keep in mind, though, that some of these pipes can't withstand unlimited freeze/thaw cycles before they crack.
A thermosiphon system relies on warm water rising, a phenomenon known as natural convection, to circulate water through the collectors and to the tank. In this type of installation, the tank must be above the collector. As water in the collector heats, it becomes lighter and rises naturally into the tank above. Meanwhile, cooler water in the tank flows down pipes to the bottom of the collector, causing circulation throughout the system. The storage tank is attached to the top of the collector so that thermosiphoning can occur. These systems are reliable and relatively inexpensive but require careful planning in new construction because the water tanks are heavy. They can be freeze-proofed by circulating an antifreeze solution through a heat exchanger in a closed loop to heat the household water.
SIZING SOLAR WATER HEATER CAPACITY
Just as you have to choose a (114-, 151-, or 189-liter) conventional water heater, you need to determine the right size solar water heater to install. Sizing a solar water heater involves determining the total collector area and the storage volume required to provide 100% of your household's hot water during the winter.
Solar storage tanks are usually 189-, 227-, 303-, or 454-liter capacity. A small (189 to 227 l) system is sufficient for 1 to 3 people, a medium (227 l) system is adequate for a 3- or 4-person household, and a large (454 l) system is appropriate for 4 to 6 people.
A rule of thumb for sizing collectors: allow about 20 square feet (about 2 square meters) of collector area for each of the first two family members and 8 square feet (0.7 square meter) for each additional family member.
A ratio of at least 5.7 liters of storage capacity to 1 square foot (0.1 square meter) of collector area prevents the system from overheating when the demand for hot water is low. In very warm, sunny climates, experts suggest that the ratio should be at least 7.6 liters of storage to 1 square foot (0.1 square meter) of collector area. For example, a family of four in a northern climate would need between 64 and 68 square feet (5.9 and 6.3 square meters) of collector area and a 363- to 386-liter storage tank.
SOLAR WATER HEATER BENEFITS
There are many benefits to owning a solar water heater, and number one is economics. Solar water heater economics compare quite favorably with those of electric water heaters, while the economics aren't quite so attractive when compared with those of gas water heaters. Heating water with the sun also means long-term benefits, such as being cushioned from future fuel shortages and price increases, and environmental benefits.
Many home builders choose electric water heaters because they are easy to install and relatively inexpensive to purchase. However, an average household with an electric water heater spends about 25% of its home energy costs on heating water.
It makes economic sense to think beyond the initial purchase price and consider lifetime energy costs, or how much you will spend on energy to use the appliance over its lifetime. It found that solar water heaters offered the largest potential savings compared to electric heating, with solar water-heater owners saving as much as 50% to 85% annually on their utility bills over the cost of electric water heating.
However, at the current low prices of natural gas, solar water heaters cannot compete with natural gas water heaters in most parts of the country except in new home construction. Although you will still save energy costs with a solar water heater because you won't be buying natural gas, it won't be economical.
Paybacks vary widely, but you can expect a simple payback of 3 to 8 years on a well-designed and properly installed solar water heater. (Simple payback is the length of time required to recover your investment through reduced or avoided energy costs.) You can expect shorter paybacks in areas with higher energy costs. After the payback period, you accrue the savings over the life of the system, which ranges from 15 to 40 years, depending on the system and how well it is maintained.
You can determine the simple payback of a solar water heater by first determining the net cost of the system. Net costs include the total installed cost less any tax incentives or utility rebates. After you calculate the net cost of the system, calculate the annual fuel savings and divide the net investment by this number to determine the simple payback.
Tax Incentives and Rebates
In India some States offer subsidies on domestic as well as commercial solar water heating systems installations. Government of India offers 100% depreciation claim in the first year itself on installation of commercial solar water heating systems.
Solar water heaters offer long-term benefits that go beyond simple economics. In addition to having free hot water after the system has paid for itself in reduced utility bills, you and your family will be cushioned from future fuel shortages and price increases. You will also be doing your part to reduce this country's dependence on foreign oil. The National Remodelers Association reports that adding a solar water heater to an existing home raises the resale value of the home by the entire cost of the system. You may be able to recoup your entire investment when you sell your home.
Solar water heaters do not pollute. By investing in one, you will be avoiding carbon dioxide, nitrogen oxides, sulfur dioxide, and the other air pollution and wastes created when your utility generates power or you burn fuel to heat your household water. When a solar water heater replaces an electric water heater, the electricity displaced over 20 years represents more than 50 tons of avoided carbon dioxide emissions alone. Carbon dioxide traps heat in the upper atmosphere, thus contributing to the "greenhouse effect."
A Bright Future
A solar water heater is a long-term investment that will save you money and energy for many years. Like other renewable energy systems, solar water heaters minimize the environmental effects of enjoying a comfortable, modern lifestyle. In addition, they provide insurance against energy price increases, help reduce our dependence on foreign oil, and are investments in everyone's future.
You might also consider other solar energy systems for your home. Systems similar to the solar water heater are used for space heating and swimming pool heating. In fact, pool heating is a major market for solar energy systems.
SOLAR WATER HEATER PRICE AND BUDGET
The total cost of a solar water heating system is dependent upon many things. These include, the capacity, the kind of back-up used, the materials used for the inner and outer tanks, the length of distribution piping required to take hot water to the bathrooms, and not insignificantly, the brand value. Typically, for an Indian make system with a single BIS approved flat plate collector of 2 sq. m area, the current market costs are reported to be in the range of Rs. 15,000-20,000, excluding the distribution piping. However this range is indicative, and could vary from manufacturer to manufacturer.
Unobstructed sunlight on a flat or slopping roof
Close to the bathrooms to avoid long piping & heat losses
A water tank at a minimum of 2.5m (7 ft) above roof level
The solar collector tubes facing south.
source home tips india